Have this Daltile Cascade Ridge Slate Ceramic Floor & Wall Tile delivered to your job site. 15.04 sq. ft. per case, 8-pieces per case. case weight equals 60 lbs.. Grade 1, first-quality ceramic tile for floor, wall, backsplash and countertop use. Actual size: 11-9/16 in. width x 23-3/8 in. length x 5/16 in. thick. Glazed matte finish with low sheen and moderate variation in tone. Class 3 abrasion resistance – suitable for floor applications with medium to heavy foot traffic. Semi-Vitreous tile has water absorption of more than 3% but less than 7%. D.C.O.F. greater than or equal to 0.42 slip-resistance meets requirements for use on dry, or wet, level floors, not recommended for shower floors due to tile size, all products manufactured by Daltile meet or exceed the requirements of the ANSI standard. Not frost resistant. Residential and commercial use. It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns.. Overlap during installation should not exceed 33%, 50% overlap not recommended.

Dimensions & details
Area:15.04sqft
Length:23.375in
Depth:0.375in
Width:11.5625in

Have this Daltile Cascade Ridge Slate Ceramic Floor & Wall Tile delivered to your job site. 15.04 sq. ft. per case, 8-pieces per case. case weight equals 60 lbs.. Grade 1, first-quality ceramic tile for floor, wall, backsplash and countertop use. Actual size: 11-9/16 in. width x 23-3/8 in. length x 5/16 in. thick. Glazed matte finish with low sheen and moderate variation in tone. Class 3 abrasion resistance - suitable for floor applications with medium to heavy foot traffic. Semi-Vitreous tile has water absorption of more than 3% but less than 7%. D.C.O.F. greater than or equal to 0.42 slip-resistance meets requirements for use on dry, or wet, level floors, not recommended for shower floors due to tile size, all products manufactured by Daltile meet or exceed the requirements of the ANSI standard. Not frost resistant. Residential and commercial use. It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns.. Overlap during installation should not exceed 33%, 50% overlap not recommended.