Have this Daltile Nova Falls Gray Porcelain Floor & Wall Tile delivered onsite. 15.6 square feet, per case, 8 pieces per case. Case weight equals 64.74 lbs.. Grade 1, first-quality porcelain tile for floor, walls and countertop use. Actual size: 11-13/16 in. width x 23-13/16 in. length x 3/8 in. thick. Glazed matte finish with low sheen and random variation in shade/tone. Class 4 abrasion resistance – suitable for floor applications with heavy foot traffic. D.C.O.F. greater than or equal to 0.42 slip-resistance meets requirements for use on dry, or wet, level floors, not recommended for shower floors due to tile size, all products manufactured by Daltile meet or exceed the requirements of the ANSI standard. Frost resistant, suitable for indoor and outdoor usage. Residential and light commercial use. It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns. Overlap during installation should not exceed 33%, 50% overlap not recommended. It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns.

Have this Daltile Nova Falls Gray Porcelain Floor & Wall Tile delivered onsite. 15.6 square feet, per case, 8 pieces per case. Case weight equals 64.74 lbs.. Grade 1, first-quality porcelain tile for floor, walls and countertop use. Actual size: 11-13/16 in. width x 23-13/16 in. length x 3/8 in. thick. Glazed matte finish with low sheen and random variation in shade/tone. Class 4 abrasion resistance - suitable for floor applications with heavy foot traffic. D.C.O.F. greater than or equal to 0.42 slip-resistance meets requirements for use on dry, or wet, level floors, not recommended for shower floors due to tile size, all products manufactured by Daltile meet or exceed the requirements of the ANSI standard. Frost resistant, suitable for indoor and outdoor usage. Residential and light commercial use. It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns. Overlap during installation should not exceed 33%, 50% overlap not recommended. It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns.