Description
Black Swan’s All Purpose Pipe Dope is a yellow, soft-set, non-toxic pipe joint compound. Provides leak-proof resistance to high pressure, temperature expansion, contraction and extreme vibration. Excellent for food and potable water systems. NSF Certified.
Black Swan’s All Purpose Pipe Dope is designed to fill tiny cracks and voids in imperfect threads to help ensure leak-free and pressure tight joints. All Purpose Pipe Dope also acts as a lubricant which permits low torque make-up and easy disassembly without stripping threads.
PHYSICAL PROPERTIES
Temperature range use: Gases and Liquids from -50° F (-45° C) to +400° F (+204° C).
Pressure range use: Gases up to 3,000 PSI. Liquids up to 6,000 PSI.
Brushable to: -50° F (-45° C).
Sets up to: Soft-set, non-hardening.
Contents: Non-toxic inert oils and carbonates. Contains no lead or silicone.
APPLICATIONS
Black Swan’s All Purpose Pipe Dope is recommended for use on ABS, PVC, CPVC, FlowGuard Gold® CPVC, BlazeMaster® CPVC, fiberglass, nylon, polypropylene, celcon, cycolac, polybutylene, delrin, polyethylene, zytel and all metals.
All Purpose Pipe Dope is recommended for lines carrying:
| Acids, Diluted | Freons (All) | Propane |
| Air, Compressed Gaseous | Gasoline | Mineral Oils |
| Alkalis, Diluted | Glycol | Natural Gas |
| Ammonia | Heating | Nitrogen, Gaseous |
| Aliphatic Solvents | Helium, Gaseous | Petroleum Solvents |
| Brine | Hydraulic Oils | Refrigeration Gases |
| Butane | Hydrogen | Soap, Liquid |
| Carbon Dioxide | Inert Gases, Gaseous | Steamlines |
| Castor Oils | Jet Fuel (JP 3, 4, & 5) | Sugar, Liquid |
| Chlorinated Water | Kerosene | Vegetable Oil |
| Coal Tar Naptha | Lacquer | Water (Hot or Cold) |
| Cutting Oils | Liquified Petroleum Gases | |
| Diesel Fuel Oil | Manufactured Gases |
DO NOT USE ON OXYGEN LINES.
DIRECTIONS
- Make sure threads are made with a good die.
- Clean surface to which the compound is to be applied of dirt, oil, moisture, etc.
- Stir before using. Do not dilute.
- Apply compound to male threads with brush or applicator. Brush well into threads to ensure leak-free joints. Cover threads completely.
- Assemble joints in usual manner.
HAZARDOUS STATEMENTS
- May be harmful if swallowed.
- May be harmful in contact with skin.
- May cause respiratory irritation and drowsiness or dizziness.
PRECAUTIONARY STATEMENTS
PREVENTATIVE:
- Keep out of reach of children.
- Keep container tightly closed.
- Do not get in eyes, on skin or on clothing.
- Use only outdoors or in well-ventilated area.
FIRST AID:
Inhalation: Move into fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and call physician.
Skin: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water.
Eyes: Flush with water for 15 minutes. If irritation persists, get medical attention.
Ingestion: Give 1 or 2 glasses of water. DO NOT INDUCE VOMITING. Contact physician immediately.
STORAGE:
Keep container closed and upright when not in use. Do not store near heat, sparks, or open flames.
DISPOSAL:
Dispose of product or container in accordance with federal, state or local regulations.
